Seminar On Stratified Charge Engine Report Download

Seminar On Stratified Charge Engine Report Download

What is Stratified Charge Engine?

The stratified charge engine is a type of internal-combustion engine which runs on gasoline. It is very much similar to the Diesel cycle. The name refers to the layering of the charge inside the cylinder. The stratified charge engine is designed to reduce the emissions from the engine cylinder without the use of exhaust gas recirculation systems, which is also known as the EGR or catalytic converters.
Stratified charge combustion engines utilize a method of distributing fuel that successively builds layers of fuel in the combustion chamber. The initial charge of fuel is directly injected into a small concentrated area of the combustion chamber where it ignites quickly. As the combustion process continues, it travels across the top of the piston to a lean area of the chamber, where cooler temperatures reduce the formation of harmful NOx emissions. Subsequent additional small injections of fuel can be introduced to propagate the flame front and manage piston knock. This arrangement works well in slow constant speed applications, but has proven difficult to manage across the wide range of speed and load incurred in automotive uses. 

Honda has used a stratified charge design in many of its "lean burn" Civic models.

 The principle of the stratified charge engine is to deliver a mixture that is sufficiently rich for combustion in the immediate vicinity of the spark plug and in the remainder of the cylinder, a very lean mixture that is so low in fuel that it could not be used in a traditional engine. On an engine with stratified charge, the delivered power is no longer controlled by the quantity of admitted air, but by the quantity of petrol injected, as with a diesel engine.


One approach consists in dividing the combustion chamber so as to create a pre-combustion chamber where the spark plug is located. The head of the piston is also modified. It contains a spheroid cavity that imparts a swirling movement to the air contained by the cylinder during compression. As a result, during injection, the fuel is only sprayed in the vicinity of the spark plug. But other strategies are possible. For example, it is also possible to exploit the shape of the admission circuit and use artifices, like “swirl” stages that create turbulent flows at their level. All the subtlety of engine operation in stratified mode occurs at level of injection. This comprises two principal modes: a lean mode, which corresponds to operation at very low engine load, therefore when there is less call on it, and a “normal” mode, when it runs at full charge and delivers maximum power. In the first mode, injection takes place at the end of the compression stroke. Because of the swirl effect that the piston cavity creates, the fuel sprayed by the injector is confined near the spark plug. As there is very high pressure in the cylinder at this moment, the injector spray is also quite concentrated. The “directivity” of the spray encourages even greater concentration of the mixture. A very small quantity of fuel is thus enough to obtain optimum mixture richness in the zone close to the spark plug, whereas the remainder of the cylinder contains only very lean mixture. 
Working of Stratified charge engine
Working of Stratified charge engine 
The stratification of air in the cylinder means that even with partial charge it is also possible to obtain a core of mixture surrounded by layers of air and residual gases which limit the transfer of heat to the cylinder walls. This drop in temperature causes the quantity of air in the cylinder to increase by reducing its dilation, delivering the engine additional power. When idling, this process makes it possible to reduce consumption by almost 40% compared to a traditional engine. And this is not the only gain. Functioning with stratified charge also makes it possible to lower the temperature at which the fuel is sprayed. All this leads to a reduction in fuel consumption which is of course reflected by a reduction of engine exhaust emissions. When engine power is required, injection takes place in normal mode, during the admission phase. This makes it possible to achieve a homogeneous mix, as it is the case with traditional injection. Here, contrary to the previous example, when the injection takes place, the pressure in the cylinder is still low. The spray of fuel from the injector is therefore highly divergent, which encourages a homogeneous mix to form.

1. Compact, light weight design and good fuel economy.
2. Good part load efficiency.
3. Exhibit multi-fuel capability.
4. The rich mixture near spark-plug and lean mixture near the piston surface provides cushing to the exploit combustion.
5. Resist the knocking and provides smooth resulting in smooth & quite engine operation over the entire speed and load range.
6. Low level of exhaust emissions, Nox is reduced considerably.
7. Usually no starting problem.
8. Can be manufactured by the existing technology.

1. for a given engine size, charge charge stratification results in reduced.
2. These engine create high noise level at low load conditions.
3. More complex design to supply rich and lean mixture, quantity is varied with load on the engine.
4. Higher weight than of a conventional engine

Download :

No comments

Powered by Blogger.