Breaking News
recent

7 Hydraulic Jack Related Mechanical Projects Report Download

7 Hydraulic Jack Related Mechanical Projects  Report Download 

A jack is a mechanical device used as a lifting device to lift heavy loads or to apply great forces. A mechanical jack employs a screw thread for lifting heavy equipment. A hydraulic jack uses hydraulic power. The most common form is a car jack, floor jack or garage jack, which lifts vehicles so that maintenance can be performed. Jacks are usually rated for a maximum lifting capacity (for example, 1.5 tons or 3 tons). Industrial jacks can be rated for many tons of load.

Jacks may be classified as below:
  1. Home Jack (Screw Jack)
  2. Hydraulic Jack
  3. Scissor Jack
  4. Trolley jack ( Floor Jack )
  5. Bottle jack ( whiskey jack)
  6. Pneumatic Jack
  7. Strand jack
  8. Farm jack 
Many students have been designing hydraulic jack project with some modifications. Below some projects are mentioned here
mechancial final year hydraulic jack project
Mechanical Hydraulic Jack Project
1) Design and development of hydraulic jack Report Download

Shivam Patel ,one of our reader has uploaded report on hydraulic jack. In report he covered introduction to Hydraulic, Principle Of Jack, How actually the system works, Detail design of hydraulic jack parts, Drawing of each hydraulic jack parts, Fabrication details , operational Sheet, and other important details are covered.

Read More and Download Report


2) Fabrication Of Quick lifting Jack With Gear Arrangement :

This device the quick lifting jack with gear arrangement for automobile garages has been developed to later the needs of small and medium automobile garages, who are normally man powered with very minimum of skilled labors. In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors. In order to avoid all such disadvantages. This, motorized hydraulic jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even an unskilled labor can handled, by just demonstrating the working of the motorized hydraulic jack once.

Read More

3) Automatic Pneumatic/ Hydraulic jack and Vice 

This project is modification of Hydraulic jack application . instead of hydraulics ,pneumatic system is used which saves total cost of project. This project is basically used for work piece positioning and then holding of the jobs firmly. two hydraulic cylinders are used for positioning and work holding of the project. Horizontal cylinder is used to operate movable jaws against fix jaw . In between these two jaws object can be hold. If Object is heavy then it can be lift by second Vertical cylinder ,the height of object can be adjusted precisely by controlling the quantity of the air or oil.

Read More (See Working Diagram) 

4)  Hydraulic Operated Lifting Table For Four Wheeler

Hydraulic Lifting Table is another modification of hydraulic jack principle.
This project is mainly developed for lifting of four wheelers in a much better way. After placing the car in the ramp right above the lifting base, with the help of the scissors lift, the lifting base can be lifted; with which the servicing or repairing work can be done easily. The required components for this arrangement are Hydraulic bottle jack, scissors lift, platform, and cylinder with fluid. This equipment is suitable for all four wheeler vehicles.

Read More

hydraulic jack project report download
Mechanical Hydraulic Jack Project
5) Design and analysis Of Hydraulic Jack Report Download

A hydraulic jack is a jack that uses a liquid to push against a piston. This is based on Pascal’s Principle. The principle states that pressure in a closed container is the same at all points. If there are two cylinders connected, applying force to the smaller cylinder will result in the same amount of pressure in the larger cylinder. However, since the larger cylinder has more area, the resulting force will be greater. In other words, an increase in area leads to an increase in force. The greater the difference in size between the two cylinders, the greater the increase in the force will be. A hydraulic jack operates based on this two cylinder system.

Read More and Download report

6) Design and analysis of Scissor Jack Full Report Download:

Scissor jacks are simple mechanisms used to drive large loads short distances.The power screw design of a common scissor jack reduces the amount of force required by the user to drive the mechanism.Most scissor jacks are similar in design, consisting of four main members driven by a power screw. A scissor jack is operated simply by turning a small crank that is inserted into one end of the scissor jack. This crank is usually "Z" shaped. The end fits into a ring hole mounted on the end of the screw, which is the object of force on the scissor jack. When this crank is turned, the screw turns, and this raises the jack. The screw acts like a gear mechanism. It has teeth (the screw thread), which turn and move the two arms, producing work. Just by turning this screw thread, the scissor jack can lift a vehicle that is several thousand pounds. Power screw in a scissor jack is the foundation of whole mechanism of scissor jack.


7) Automatic Electro-Hydraulic Jack For Light Vehicles

This device the automatic electro-hydraulic jack for light vehicle garages has been developed to later the needs of small and medium automobile garages. In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors.

In order to avoid all such disadvantages, this automatic electro-hydraulic Jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even any person can handled, by just pressing the button.

No comments:

Post a Comment

Powered by Blogger.