Breaking News
recent

Introduction to Hydraulic Circuit (System) and Application/Advantages/Disadvantages

Hydraulic System:

The controlled movement of parts or a controlled application of force is a common requirement in the industries. These operations are performed mainly by using electrical machines or diesel, petrol and steam engines as a prime movers. These prime movers can provide various movements to the objects by using some mechanical attachments like screw jack, lever, rack and pinions etc. However, these are not the only prime movers. The enclosed fluids (liquids and gases) can also be used as prime movers to provide controlled motion and force to the objects or substances. The specially designed enclosed fluid systems can provide both linear as well as rotary motion. The high magnitude controlled force can also be applied by using these systems. This kind of enclosed fluid based systems using pressurized incompressible liquids as transmission media are called as hydraulic systems. The hydraulic system works on the principle of Pascal's law which says that the pressure in an enclosed fluid is uniform in all the directions.

Refer This:


The hydraulic systems consists a number of parts for its proper functioning. These include storage tank, filter, hydraulic pump, pressure regulator, control valve, hydraulic cylinder, piston and leak proof fluid flow pipelines. The schematic of a simple hydraulic system is shown in figure . It consists of:
  • a movable piston connected to the output shaft in an enclosed cylinder
  • storage tank
  • filter
  • electric pump
  • pressure regulator
  • control valve
  • leak proof closed loop piping.
Hydraulic Circuit (System)
Fig. Hydraulic System
The output shaft transfers the motion or force however all other parts help to control the system. The storage/fluid tank is a reservoir for the liquid used as a transmission media. The liquid used is generally high density incompressible oil. It is filtered to remove dust or any other unwanted particles and then pumped by the hydraulic pump. The capacity of pump depends on the hydraulic system design. These pumps generally deliver constant volume in each revolution of the pump shaft. Therefore, the fluid pressure can increase indefinitely at the dead end of the piston until the system fails. The pressure regulator is used to avoid such circumstances which redirect the excess fluid back to the storage tank. The movement of piston is controlled by changing liquid flow from port A and port B. The cylinder movement is controlled by using control valve which directs the fluid flow. The fluid pressure line is connected to the port B to raise the piston and it is connected to port A to lower down the piston. The valve can also stop the fluid flow in any of the port. The leak proof piping is also important due to safety, environmental hazards and economical aspects. Some accessories such as flow control system, travel limit control, electric motor starter and overload protection may also be used in the hydraulic systems which are not shown in figure .

 Applications of hydraulic systems

The hydraulic systems are mainly used for precise control of larger forces. The main applications of hydraulic system can be classified in five categories:

  • Industrial: Plastic processing machineries, steel making and primary metal extraction applications, automated production lines, machine tool industries, paper industries, loaders, crushes, textile machineries, R & D equipment and robotic systems etc.
  • Mobile hydraulics: Tractors, irrigation system, earthmoving equipment, material handling equipment, commercial vehicles, tunnel boring equipment, rail equipment, building and construction machineries and drilling rigs etc.
  • Automobiles: It is used in the systems like breaks, shock absorbers, steering system, wind shield, lift and cleaning etc.
  • Marine applications: It mostly covers ocean going vessels, fishing boats and navel equipment.
  • Aerospace equipment: There are equipment and systems used for rudder control, landing gear, breaks, flight control and transmission etc. which are used in airplanes, rockets and spaceships.

 Advantages and Disadvantages of Hydraulic system

Advantages
  • The hydraulic system uses incompressible fluid which results in higher efficiency.
  • It delivers consistent power output which is difficult in pneumatic or mechanical drive systems.
  • Hydraulic systems employ high density incompressible fluid. Possibility of leakage is less in
    hydraulic system as compared to that in pneumatic system. The maintenance cost is less.
  • These systems perform well in hot environment conditions. 
 Disadvantages Of Hydraulic System:
  • The material of storage tank, piping, cylinder and piston can be corroded with the hydraulic fluid. Therefore one must be careful while selecting materials and hydraulic fluid.
  • The structural weight and size of the system is more which makes it unsuitable for the smaller instruments.
  • The small impurities in the hydraulic fluid can permanently damage the complete system, therefore one should be careful and suitable filter must be installed.
  • The leakage of hydraulic fluid is also a critical issue and suitable prevention method and seals must be adopted.
  • The hydraulic fluids, if not disposed properly, can be harmful to the environment.

No comments:

Post a Comment

Powered by Blogger.