Breaking News
recent

AUTOMATIC GEAR CHANGER IN TWO WHEELERS – PNEUMATIC MODEL


SYNOPSIS
The main objective of this concept is used to apply the gear by using automation system in automobile vehicles. This is the new innovative model mainly used for the vehicles to control the vehicle. Here we are concentrating to design the automatic gear changing mechanism in two wheeler vehicles by using the electronic devices. This is very useful for the gear changing mechanism in automobile vehicles. By using this we can easily control the vehicle and improve the performance of the vehicle also we can avoid the wear and tear of the gear.
See Also : Project- Automatic Gear Changer Model
BLOCK DIAGRAM
AUTOMATIC GEAR CHANGER IN TWO WHEELERS


WORKING PRINCIPLE
Here we have two pneumatic cylinders arrangements which are arranged on either side of the vehicle pedal rest for applying the gear. The pneumatic cylinder is fixed at the end of the flat pedal rest. The plate rest has pivot at the center. The cylinders are operated with the help of electric power supply and it is controlled by the control unit. One of the cylinders is used to apply the gear and another one for reducing the gears. The gears are applied on the vehicle depending up on the speed of the vehicle. The speed sensors are placed near the wheel the sensor sense the signal and give the output signal to the control unit. For this purpose, here we are using a tape motor with a U slot sensor such that the speed can be varied through the tape motor. Depending up on the signal the clutch and gears will automatically changed with the help of the control unit. When the vehicle speed increases automatically the clutch and the gear will change in the vehicles. The arrangement is clearly shown in the below diagram.

ADVANTAGES
Ø  Automatic method
Ø  System is helpful for the drivers
Ø  Avoids fear while driving the vehicle
Ø  Quick response is achieved
Ø  Simple in construction
Ø  Easy to maintain and repair
Ø  Cost of the unit is less
Ø  Continuous operation is possible without stopping

DISADVANTAGE
          We need to alter gear shifter which may increases the vehicles weight and will reduce the drivers comfort.

APPLICATION
It is applicable in all types of two wheeler vehicles.

DRAWING FOR AUTOMATIC GEAR CHANGER IN TWO WHEELERS – PNEUMATIC MODEL
DRAWING FOR AUTOMATIC GEAR CHANGER IN TWO WHEELERS – PNEUMATIC MODEL


See More Projects On automatic gear shifting  :

 1. Automatic Gear changer in Two Wheeler with pneumatic Cylinder
 2. Automatic gear changer By D.C. Electronic Gun 

No comments:

Post a Comment

Powered by Blogger.